TRIUMPH MOULDED SUPPORT COVER TR6 1973 TO 1976

$210.00

SKU: TR673-765 Category:

Description

This MOLDED DASH SUPPORT COVER fits the 1973 to 1976 Triumph TR6.

    • Features flat sides and one switch hole indentation under the radio for the interior lamp switch
    • Thickness, Shape, Form and contours Match the original factory part 
      • Made like the Original
      • Correct Color and Grain
      • Strong detailed vacuum Definition
    • Trimmed on its original underlying metal casting providing a Handcrafted intricately trimmed part

 
Since 1981 we have had a custom black vinyl formulation to match the original British interior.

Other aftermarket manufacturers have used low-cost-knock off injection molding, which lack both hand trimming and definition.

Additional information

Weight 3.0 lbs
Dimensions 20 × 14 × 10 in

Installation Tips

TRIUMPH TR6 DASH SUPPORT COVER: 1973 TO 1976
PRINT INSTALLATION PDF
Tools needed

UTILITY KNIFE
NARROW PUDDY KNIFE
WIRE BRUSH
X-ACTO KNIFE (# 11 BLADE)
MEDIUM SANDPAPER
ACETONE
CONTACT CEMENT AND BRUSH

Installation Tip:

Consult manual and remove old part from the car.

Strip all vinyl and foam from the core with sharp utility knife, putty knife and wire brush

With a clean cloth use Acetone to painstakingly clean your core

Inspect the casting for cracks and or excessive corrosion. If either is present replace for repair. The casting is a structural part of the car!

Scuff the flaps using sandpaper on any area that glue may be applied.

You want to remove the entire mold release wax agent used in the construction of the support cover and give the glue a rough surface to bond to

Taping Option

Slip new padded skin in place on the core
Glue first the flaps that wrap under the “shifter surround” making sure the pad is snug to the casting and the wrap around edge is tidy, next wrap around the leg flaps

Holding the front and back flaps firmly in place. Cut the bolt holes from the underside (using X-ACTO knife) and glue the side flap under, use the X-ACTO knife and utility knife to cut the radio fascia patterns from the backside, guiding on the casting.

Also cut out the vinyl on top to mate with the switch plate and notch if needed for lamp wiring

Bond surface liberally using a small bottle of contact cement with a brush

Do not use an aerosol spray adhesive.

Gluing Option

Apply the glue to the casting & support pad. Let dry.

There is no need to apply glue on every under surface of your new support pad.

Place a pattern of overlay pieces of thin plastic polyethylene over the casting. Mount your dash on top of the plastic strips.
Pull free from between madding surfaces easing the correct index of the assembly.

Also cut out the vinyl on top to mate with the switch plate and notch if needed for lamp wiring